Calculation methods for spur gears with symmetrical and asymmetrical teeth

Authors

  • Jorge L. Moya Rodríguez Facultad de Ingeniería Mecánica, Universidad Central “Marta Abreu” de Las Villas
  • José Alberto Velázquez Pérez Facultad de Ingeniería Mecánica, Universidad Central “Marta Abreu” de Las Villas
  • Rafael Goytisolo Espinosa Facultad de Ingeniería Mecánica, Universidad Central “Marta Abreu” de Las Villas
  • Edimir Betancourt Castañeda Facultad de Ingeniería Mecánica, Universidad Central “Marta Abreu” de Las Villas

Keywords:

Gears, plastics, Lewis

Abstract

Plastic spur gears are employed today in many fields of industry. For mechanical engineers, plastic gears are a powerful means of cutting drive cost, weight, noise, and wear.Plastic gears also open new opportunities for smaller, more efficient transmissions in many products. The main failure of these gears is bending fracture and there are several calculation methods for avoid or diminish this failure. Bending stress evaluation in modern
gear design is generally based on the more-than-one hundred- year-old Lewis equation with different modifications. A comparison among today’s calculation methods is made at this paper. A new Method base on Finite Element Method is proposed.

Downloads

Download data is not yet available.

Downloads

Published

2006-01-01

How to Cite

Moya Rodríguez, J. L., Velázquez Pérez, J. A., Goytisolo Espinosa, R., & Betancourt Castañeda, E. (2006). Calculation methods for spur gears with symmetrical and asymmetrical teeth. Centro Azúcar Journal, 33(1). Retrieved from http://centroazucar.uclv.edu.cu/index.php/centro_azucar/article/view/606

Issue

Vol. 33 No. 1 (2006)

Section

Original Articles

Most read articles by the same author(s)

<< < 1 2