MODIFICATIONS TO MATRIX OF CONTRADICTIONS FOR DESIGNING PLASTIC SPUR GEARS

Authors

  • Paul Marcelo Tacle Humanante epartamento de Energía y Mecánica. Universidad de las Fuerzas Armadas ESPE. Extensión Latacunga. Calles Quijano y Ordoñez y Hermanas Páez, Cotopaxi-Latacunga, Ecuador
  • Jorge Laureano Moya Rodríguez Departamento de Ingeniería Química. Universidad Federal de Bahía. Escuela Politécnica. Calle. Prof. Aristídes Novis, 2. Federação, Salvador de Bahía. Brasil
  • José Roberto Marty Delgado Departamento de Ingeniería Mecánica. Facultad de Ingeniería Mecánica e Industrial. Universidad Central “Marta Abreu” de Las Villas. Carretera a Camajuaní, km 5 ½, Santa Clara, Villa Clara, Cuba

Keywords:

Spur gears, matrix of contradictions, engineering principles, TRIZ

Abstract

The Theory of Inventive Problem Solving(TRIZ) is a method widely used today to solve engineering tasks and to develop new products. Two of the key foundations to apply TRIZ are the matrix of contradictions and the engineering principles. They have remained almost unchanged since their origin, and designers have difficulty using themsuccessfully in a wide range of engineering problem configurations. The objective of this paper is to present the results of contradiction matrix and the engineering principles analysis, based on current scientific and technological development, as well as the modifications required in the field of mechanical engineering in general, applied to the design of plastic spur gear transmissions.

Downloads

Download data is not yet available.

Downloads

Published

2019-01-01

How to Cite

Tacle Humanante, P. M., Moya Rodríguez, J. L., & Marty Delgado, J. R. (2019). MODIFICATIONS TO MATRIX OF CONTRADICTIONS FOR DESIGNING PLASTIC SPUR GEARS. Centro Azúcar Journal, 46(1), 11. Retrieved from http://centroazucar.uclv.edu.cu/index.php/centro_azucar/article/view/47

Issue

Vol. 46 No. 1 (2019)

Section

Original Articles

Most read articles by the same author(s)